Radionix Swiveling Low-Profile Wall Mount B335-3 for Motion Detectors
Aim it right, then leave it.
A white, low-profile wall mount for Bosch CAM940C and CAM940CE PIR motion detectors. It swivels so you can fine-tune the detector's aim during installation.

A detector is only as good as its aim.
A motion detector fixed flat to a wall can point the wrong way. A mount that pivots lets the installer adjust the coverage direction on site.
Built to hold and aim
The B335-3 keeps the detector close to the wall while giving you room to adjust its direction.
Low-profile wall mount
Surface-mounts to the wall and keeps the detector close to it, with a depth of 2.7".

Horizontal swivel range
Swing the detector left or right to fine-tune its aim.
Vertical swivel range
Tilts from +10° to -20° so you can angle the detector up or down.
Horizontal swivel range
Swivels ±25° left and right to point the detector where it is needed.
Lightweight ABS build
Made from ABS plastic in white, with a 5.0" width.
Everything you need to know.
| Brand | Radionix |
| Model | Low-Profile |
| Color | White |
| Compatibility | Bosch CAM940C and CAM940CE PIR Motion Detectors |
| Depth | 2.7" |
| Width | 5.0" |
| Material | ABS |
| Device Supported | Motion Detector |
| Features | Pivot, Swivel |
| Installation Type | Commercial |
| Vertical Swivel | +10° to -20° |
| Horizontal Swivel | ±25° |
Radionix Swiveling Low-Profile Wall Mount B335-3 for Motion Detectors
The Radionix B335-3 is a detector mounting bracket (Swiveling Low-Profile Mount for Motion Detector). It is an accessory or sensor for professionally installed security systems.
Key Features
- Low-profile wall mounting.
- Vertical swivel range is +10° to -20°.
- Horizontal swivel range is ±25°.
Specifications
- Brand: Radionix
- Model: B335-3
- Product Type: Mounting Bracket
- Device Supported: Motion Detector
- Material: ABS, Plastic
- Color: White
- Weight (Approximate): 0.20 lb
- Installation Type: Commercial
- Compatibility: CAM940C PIR Motion Detectors, CAM940CE PIR Motion Detectors
- Features: Pivot, Swivel
- Shipping weight: 0.25 lb
Typical Uses
- Mounting detectors on walls or ceilings
- Fine-tuning detector aim during installation
- Replacement mounting hardware
Before ordering, confirm that this part matches your control panel, detector or system model and the wiring or frequency in use. Check the specifications above and the installation guide for your system.
Need help with compatibility?
Looking for a manufacturer part number, compatible replacement, or quantity order? Contact Raztechs for sourcing and quote support.

Radionix Low-Profile, ready to order.
- Color: White
- Compatibility: Bosch CAM940C and CAM940CE PIR Motion Detectors
- Depth: 2.7"
- Width: 5.0"
Related equipment
You may also like
Radionix RJ31X Telephone Jack D166 for Alarm Line Seizure
Model: RJ31X
Radionix 6-Location Mounting Plate D9002-5, 3-Hole, 5-Piece
Model: 6-Location
Radionix Earth Ground Clamp D167 for 0.5 to 1 in Pipe
Model: D167
Radionix Dual Modular Telephone Cord D161, 7 ft (2.1 m)
Model: D161
Radionix 18VAC 50VA Plug-In Transformer TR1850
Model: 18VAC
Radionix Dual Battery Harness D122 for Alarm Control Panels
Model: D122
Radionix 18VAC 22VA Plug-In Transformer CX4010
Model: 18VAC
Radionix Dual Battery Harness D122L with Long Leads
Model: D122L
