Mag Daddy Magnetic PCB Standoff Kit PCBM100 with 10 lb Magnets and Snap-In Supports for Steel Enclosures
Mount boards. Skip the drill.
A magnetic PCB standoff kit that holds circuit boards inside steel enclosures with 10 lb magnetic bases and snap-in nylon supports. No drilling, tapping, welding or adhesive.
Pre-punched holes rarely land where your board needs to go.
Drilling or tapping a steel enclosure takes time and leaves permanent marks. Enclosure hole patterns can also limit where a board can sit.
Magnetic mounting, no tools
Each standoff pairs a magnetic base with a snap-in nylon support.
10 lb magnetic hold
Each base has 10 lb of magnetic pull strength for a secure hold on steel enclosure walls.
Magnetic pull strength
Secure hold on steel enclosure walls.
Snap-in nylon supports
The board clicks onto the standoff through its mounting hole with no screws.
Clean, intact enclosures
No drilling, tapping, welding or adhesive is needed, so the enclosure stays unmarked.
Add or reposition fast
Quickly add, remove or reposition boards, and mount where pre-punched holes don't fit.
- Fast shippingUS and Canada
- 30-day returnsOn eligible items
- Quotes & sourcingJust ask
Everything you need to know.
| Brand | Mag Daddy |
| Model | PCBM100 |
| Product Type | Magnetic PCB standoff kit |
| Magnetic Pull | 10 lb |
| Support | Snap-in nylon standoff |
| Contents | Hardware for three boards |
| Packaged Quantity | 1 |
| Package Dimensions | 6" x 1" x 4" |
| Weight | 0.2 lb |
| Country of Origin | US |
Mag Daddy Magnetic PCB Standoff Kit PCBM100 with 10 lb Magnets and Snap-In Supports for...
The PCBM100 is a magnetic PCB standoff kit that mounts circuit boards inside steel enclosures without drilling. Each standoff combines a 10 lb magnetic base with a nylon support that snaps through the board's mounting hole, so boards can be installed quickly, positioned freely and repositioned whenever the layout changes.
Key Features
- 10 lb magnetic pull strength – secure hold on steel enclosure walls.
- Snap-in nylon supports – the board clicks onto the standoff with no screws.
- No drilling, tapping, welding or adhesive – keeps enclosures clean and intact.
- Avoid enclosure limitations – mount boards where pre-punched holes don't fit.
- Quickly add, remove or reposition boards.
- Hardware for three boards included.
Specifications
- Product type: Magnetic PCB standoff kit
- Model: PCBM100
- Magnetic pull: 10 lb
- Support: Snap-in nylon standoff
- Contents: Hardware for three boards
- Package dimensions: 6" x 1" x 4"
- Weight: 0.2 lb
Typical Uses
- Mounting control, relay and expansion boards in steel cabinets
- Security, fire and access control panel installs
- Service work where boards need to be moved or replaced
For use on steel (magnetic) surfaces only. Confirm the board's mounting hole size fits the snap-in support.
Need help with compatibility?
Looking for a manufacturer part number, compatible replacement, or quantity order? Contact Raztechs for sourcing and quote support.
Mag Daddy PCBM100, ready to order.
- Hardware for three boards
Related equipment
You may also like
Mag Daddy Magnetic Circuit Board Standoff Kit PCBM1903F, 10 lb Magnets with 5/8 Inch Nylon Hex Spacers
Model: PCBM1903F
Mag Daddy Small Magnetic Cable Tie Mount 62406, 10 lb Pull, Plenum Rated, White, 10-Pack
Model: 62406
Mag Daddy 1-5/16 Inch Magnetic J-Hook JH21MS, Side Mounted, 17 lb Load Rating, Retaining Strap, 10-Pack
Model: 1-5/16
Mag Daddy 3/4 Inch Magnetic J-Hook JH12MT, Top Mounted, 17 lb Load Rating, Retaining Strap, 10-Pack
Model: J-Hook
Mag Daddy Female Threaded Magnet Mount MAGTF6 with 6-32 Thread, 40 lb Pull, for Fixtures and Cameras
Model: MAGTF6
Mag Daddy 3/4 Inch Magnetic Cable Holder 62419, 10 lb Pull, Plenum Rated, Black, 10-Pack
Model: 62419
Mag Daddy 1/2 Inch Magnetic Cable Holder 62409, 10 lb Pull, Plenum Rated, Black, 10-Pack
Model: 62409
Mag Daddy Large Magnetic Cable Tie Mount 62416, 15 lb Pull, Plenum Rated, White, 10-Pack
Model: 62416