Altronix NAC Power Supply AL842ULADA, 24VDC at 8A, Red BC600 Enclosure

Name: Altronix NAC Power Supply AL842ULADA, 24VDC at 8A, Red BC600 Enclosure
Brand: Altronix
SKU: Raz-AL842ULADA
Price: 937.91 USD
Availability: InStock

More power for every horn and strobe.

A 24VDC, 8A NAC power supply in a red BC600 enclosure that extends your fire alarm panel's notification circuits, with horn/strobe Sync mode and trouble monitoring built in.

$937.91

In stock

Fast shippingAltronixSecure checkout

24VDC at 8ANAC power in a red enclosure

Horns and strobes in SyncSilenced at the same time

Your panel can only power so many notification devices.

Adding horns and strobes to a fire alarm system can outgrow the panel's own notification circuits. A remote NAC power supply adds capacity and keeps trouble conditions visible.

Without itWithout it, expanding notification coverage means stretching a panel's existing circuits, with intermittent loop faults that are hard to trace.

✓

With the AL842ULADAWith it, you get 24VDC at 8A of NAC power, ground fault detection and signal circuit trouble memory to help track down intermittent loop problems.

What you get

Built for NAC expansion and monitoring

It pairs notification power with the supervision and trouble reporting a fire alarm install needs.

Horn/strobe Sync mode

2-wire Sync mode lets horns and strobes be silenced or deactivated at the same time.

Altronix NAC Power Supply AL842ULADA, 24VDC at 8A, Red BC600 Enclosure

output current at 24V DC

Power for notification appliance circuits from a single wall-mount unit.

Trouble memory

Signal circuit trouble memory helps identify intermittent loop problems.

Ground fault detection

Ground fault detection is built in, and a common trouble input and output ties in external trouble signals.

Works with your panel

Compatible with 12VDC or 24VDC fire panels, with output loop supervision steered to Input 1 or Input 2.

Details

Everything you need to know.

Brand	Altronix
Model	AL842ULADA
Output Voltage	24V DC
Output Current	8A
Compatibility	Fire Alarm System
Color	Red
Height	18.0"
Width	14.5"
Depth	4.6"
Operating Temperature	32-120°F
Indoor/Outdoor	Indoor
Country of Origin	US

Description

Altronix NAC Power Supply AL842ULADA, 24VDC at 8A, Red BC600 Enclosure

The Altronix AL842ULADA is a power supply product: NAC Power Supply (24VDC at 8A, Red BC600 Enclosure). It is aimed at security integrators, low-voltage contractors and facility teams who need a genuine Altronix product for new installs, expansions or replacements.

Key Features

2-wire horn/strobe Sync mode allows audible notification appliances (horns) and visual notification appliances (strobes) to be silenced/deactivated at the same time.
Signal circuit trouble memory (helps identify intermittent loop problems).
Ground fault detection.
Compatible with 12VDC or 24VDC fire panels.
Output loop supervision steered to Input 1 or Input 2.
Common trouble input and output for external trouble signals tie-in.

Specifications

Brand: Altronix
Model: AL842ULADA
Product Type: Proprietary Power Supply
Output Voltage: 24V DC
Output Voltage (V DC): 24
Output Voltage (V): 24
Depth: 4.6"
Form Factor: Wall Mount
Height: 18"
Width: 14.5"
Input Voltage: 110V AC
Input Voltage (V AC): 110
Output Current: 8A
Output Current (A): 8
Amperage: 8A
Limited Warranty: Lifetime
Compatibility: Fire Alarm System
Environmental Certification: ROHS
Environmentally Friendly: Yes
Shipping weight: 17.35 lb

Typical Uses

Powering access control, CCTV, fire alarm and security devices
Commercial security and life-safety installs

Power and security equipment should be installed by qualified personnel following local electrical codes and the manufacturer's installation instructions. Please confirm the AL842ULADA matches your voltage, current, enclosure and wiring requirements before ordering, and contact us with your existing equipment models if you need help checking compatibility.

Good to know: Please confirm the AL842ULADA matches your voltage, current, enclosure and wiring requirements before ordering. Installation should be done by qualified personnel following local electrical codes and the manufacturer's instructions.