You're upstairs. The doorbell rings. You find out an hour later from a notification you never heard.
Or your backyard camera goes offline every time the wind blows. Same root problem: your Ring gear is too far from the action.
The Ring Chime Pro fixes both, and it takes about five minutes.
Two Problems, One Plug
It rings inside. Doorbell presses and motion alerts play out loud wherever you plug it in: upstairs, the basement, the garage office.
It boosts Wi-Fi for Ring. It extends the signal to doorbells and cameras sitting at the edge of your network, so they stop lagging and dropping out.
Do You Need One?
Probably, if any of these sound familiar:
- You miss rings when you're in another part of the house
- Your Ring app shows a weak signal on a doorbell or camera
- Live view buffers or freezes
- Your battery doorbell has no indoor chime at all
Where to Plug It In
This is the part people get wrong. For the chime, put it where you want to hear it. For the Wi-Fi boost, put it halfway between your router and the struggling device, not right next to the device. It still needs a solid signal from the router to pass along.
The Ring app tells you during setup whether the spot is good. Trust it, and move one outlet closer to the router if it complains.
Setup in 3 Steps
- Plug it in.
- Add it in the Ring app and connect it to your Wi-Fi.
- Pick which doorbells and cameras ring on it and which connect through it.
No wiring, no tools, no electrician.
Nice Extras
A built-in nightlight for dark hallways, adjustable volume, a snooze for nap time, and Alexa support.
Chime or Chime Pro?
If you only need sound, a basic chime works. If any Ring device ever buffers or drops, get the Pro. It's the only one that fixes the signal too.
Ready to stop missing the door? Get the Ring Chime Pro, or ask our team if you're not sure it fits your setup.


